Technology: Portable; pressurized gas

The Kal-Kit^® is a convenient portable calibration kit containing everything needed to calibrate Rel-Tek (and most other) gas sensors. It contains two 20-liter tanks of cal gas, usually zero and a selected span gas. Tanks are nested in a shock resistant bed, rigidly captured by a brace and wing nut. Brass needle valves control the gas flow from either tank. A bead type flowmeter indicates the flow in ml/min. Two pressure gages show the pressure in each supply tank.

A 10' (3 m) length of 1/8" (3mm) ID flexible tube connects the flowmeter to a sensor adapter cap designed to mate with the sensing device being calibrated, all housed in a durable 9x17x82" utility box with handle. There are no electrical components, so unit may be taken into hazardous areas. Total weight is about 6 pounds (2.7Kg). Pressure gages have a range of 0-300 psi, covering the 250 PSI normal max pressure of the gas tanks. The 20L tanks are triple-flushed at Rel-Tek to avoid contamination of the NBS traceable gas.

Item	Model	Code
Kal-Kit Complete with 2 tanks gas	KK-xx/yy	7.90xx/yy
Kal-Gas tank (15L, 250 psig)	KG-xx/yy	7.93xx
Kal-Gas 6-pack (all one kind)	KG/6-xx/yy	7.96xx

For H2S, SOx, NOx, and other gases... call factory. Other gases available on request.

Specify gases and concentrations to be supplied with Kal-Kit. The standard flow meter supplied has a range of 0-500 cc/min. Calibration adapter caps are usually supplied by the sensor manufacturer, however, one is included with Kal-Kit which fits all Rel-Tek sensor heads. Containing pressurized gas, shipments are deemed hazardous. Domestic UPS shipping available. Call for more information or to place orders.

Kal-Kit ia a registered Rel-Tek trademark.