The TelEcon-401 is our low cost stand-alone controller. This unit is ideal for
monitoring 1-4 sensors of any type that has a 4-20mA output.The programmable
RM420i controls alarms depending upon how many modules are installed
in the enclosure. The TelEcon-401 can be powered by 110VAC/
or 24VDC. There is also an optional back-up battery re-chargable system.
The size of the panel is dependented on the number of modules used. Since
many customers' needs are different, the TelEcon-401 is modularly adaptable to custom
requirement.
The following specification sheet is based on a single input unit, with internal power supply and alarms:
Specification Sheet:
Dimension
Enclosure 11.5” x 9” x 4.25”
Overall w/strobe 15.5” x 10.5 x 4.25”
Weights
10 lbs
AC Input Power
110-120VAC (20 watts)
DC Power
24VDC (1 Amp)
Audible Alarm
108 dB @ 2ft
Visual Alarm
500,000 candle power
Cable entries
provided by installer.
Wire Gauge
14AWG + GND.
Mounting Hardware
use ¼” mounting screws
Environment
Temperature
Humidity
for fresh air only
-40F to +125F (except battery)
0-95% RH, non-condensing
The TelEcon-401 is our low cost stand-alone controller. This unit is ideal for
monitoring 1-4 sensors of any type that has a 4-20mA output.The programmable
RM420i controls alarms depending upon how many modules are installed
in the enclosure. The TelEcon-401 can be powered by 110VAC/
or 24VDC. There is also an optional back-up battery re-chargable system.
The size of the panel is dependented on the number of modules used. Since
many customers' needs are different, the TelEcon-401 is modularly adaptable to custom
requirement.