MagiKal/DX™ - Demonstration Cycle

A <== 50% of full scale corresponds with 50% LEL span gas used. Normal MagiKal/DX™ cycle, approx 18-min duration Verification cycle, for demonstration only <3 min=> B C Time====> SENSOR1 SENSOR2 SENSOR3 SENSOR4 SENSOR5 SENSOR6 SENSOR7 SENSOR8

A. Start MagiKal/DX™, apply span gas B. End span gas, apply zero gas C. End zero gas cycle; computer applies numerical adjustments The above MagiKal/DX™ demonstration cycle begins with eight purposely mis-calibrated methane sensors and ends with eight fully calibrated units in under 20 minutes. One MagiKal/DX™ system can process up to 64 sensors at a time, within a 200 ft radius, all within the same time frame. An MagiKal/DX™ system can be installed on a wheeled cart and shuttled between sensor groups for economically handling very large plants with hundreds of sensors. The savings in labor and calibration gas cost can pay for MagiKal/DX™ in less than a year. Note: Variations among sensors reflects the varying distances for cal gas transmission, ranging from 10-175 feet from the MagiKal/DX™ station in this particular demonstration group.

Home l FAQ l Contact l Sitemap l Application l Links

Copyrights 2005 Rel-Tek Corporation. All rights reserved